Development and Evaluation of a Nanoparticle Generator for Human Inhalation Studies with Airborne Zinc Oxide

In the EU there is an increasing need for regulatory agencies to derive health based threshold limits based on human inhalation studies with airborne particles. A necessary prerequisite for such projects is the development of a suitable generator system to produce nanoparticle test aerosols for human whole-body inhalation studies. We decided to use a generator with flame-based heating of aqueous precursor solutions. Validation of the test system was done by generating zinc oxide (ZnO) nanoparticles with minimal contamination of trace gases, i.e., nitric oxides or carbon monoxide that could confound the effects seen in exposed subjects. ZnO was selected based on the uncertainties surrounding its health effects after exposure at the workplace. The generation process of the developed flame generator yields ZnO nanoparticles with monomodal size distribution and very good temporal stability. The maximum target exposure mass concentration of 2 mg/m³ ZnO, with a resulting median particle diameter of 57 nm, is attainable in our human exposure laboratory. The morphological examination shows typical agglomerates and aggregates formed by high temperature processes. Overall, the performed experiments confirm that a constant exposure can be provided for all subjects at all times.

Copyright 2014 American Association for Aerosol Research     

Structural dynamics of a mobile substation during transport

Mobile substations can be defined as completely equipped electrical substations. There is a lack of existing scientific basis in the mechanical design of the structural components of the mobile substation. In concrete there are no capabilities to determine the dynamic behavior during transport and service conditions. Improper dimensioning of the structures results in an important degree of mechanical failures during transport. The dynamic response of structures on a mobile substation to transport motions depends on their strength of construction, ductility, and dynamic properties. Lightly damped structures that have one or more natural modes of oscillation within the frequency band of transport excitations can experience considerable amplification of both the forces and deflections. Thus, items of mobile substation equipment whose natural frequencies lie in the normal frequency range of transport motion are particularly vulnerable to damage and fatigue. Therefore we are interested in analyzing the natural frequencies, damping ratios (modal parameters) and level of accelerations of those components. In this paper it will be shown how above parameters can be retrieved from a road test on a mobile substation and be applied to develop adequate design rules and design tools as well as recommendations in order to guarantee the mechanical integrity of mobile substations during transport and service conditions. Finally the influence of conductor cables on the dynamic behavior of interconnected equipment will briefly be discussed.     

Fouling Detection in an Optically Accessible Microstructured Heat Exchanger

The application of highly effective microstructured devices in continuous production and industrial environments is frequently prone to fouling. A new method is presented to characterize fouling in these microstructures. Thermal fouling of aqueous solutions containing whey protein were used as a test system. Different fouling effects could be observed and distinguished. Integral fouling indicators, such as thermal fouling resistance and pressure drop, as conventional criteria for the occurrence of fouling were compared with direct local optical observation. Low thermal fouling resistances could be detected.     

Hot Deformation of AA6082 Containing Fine Intermetallic Particles

Hot deformation of AA6082 aluminum alloy was studied by compression tests carried out between 573 K and 823 K (300 °C and 550 °C) under a wide range of strain rates. Light optical and scanning electron microscopy were used to study the as-received microstructure, which consisted of elongated, partially recrystallized grains containing fine Mg₂Si and AlFeMnSi particles. The hot-deformed material showed the effects of dynamic recovery, i.e., small low angle grain boundary formation and dislocation pinning by fine particles. The flow data were used to calculate the constitutive equations, obtaining high values of n exponent. This behavior was attributed to the interaction of particles with dislocations during hot deformation. Threshold stresses were introduced to adjust the constitutive equation to a n exponent value of 5 at high stresses and a value of 3 in the low stresses range, which was related to dislocations’ climbing and sliding and thus to dynamic recovery. The threshold values were related to the detachment stresses in close connection with the precipitation state which was a function of the deformation temperature.